If the safe incorporates a re-locker device plate, it will likely attach to the lock body as shown. If it attaches using the locks cover screw, make sure the screws engage the lock by at least four threads. Substitute longer 8-32 machine screws if necessary. It may be necessary to trim longer screws to a proper working length. The relock device attaching screws must NOT be longer than the depth of the tapped hole provided in the lock case. A screw should not penetrate the threaded hole more than .150 inch. The hole is actually about .160 inch deep.
Applicable to:
Titan, Spartan, Audit 2.0 Pivot Bolt and DDrive
